In summer, the water temperature of concrete mixer is easy to be too high. If the temperature is too high, it will affect the normal use of the equipment. Here we introduce the high water temperature solution of Zhongke Jufeng mixer:

　　1、冷卻風扇不轉，冷卻風扇可由溫度開關控制;它也可以由水溫傳感器控制。

　　1. If the cooling fan does not turn, the cooling fan can be controlled by the temperature switch; it can also be controlled by the water temperature sensor.

　　二、降溫不及時

　　2、 Cooling is not timely

　　1. 防凍液:要求全年添加防凍液。

　　1. Antifreeze: it is required to add antifreeze throughout the year.

　　2. 水或蒸餾水:臨時替代。水箱蓋漏水。

　　2. Water or distilled water: temporary replacement. The water tank cover is leaking.

　　三、水箱堵塞了

　　3、 The water tank is blocked

　　1. 使用水或空氣清除外部堵塞的污垢。

　　1. Use water or air to remove dirt from external blockage.

　　2. 內部堵塞會影響冷卻液的循環，產生壓力，導致水箱漏水，高速運行時水溫極高。

　　2. Internal blockage will affect the circulation of coolant, generate pressure, cause water leakage of water tank, and the water temperature is very high when running at high speed.

　　4、泵故障

　　4. Pump failure

　　1. 由于葉輪打滑或夾持造成正時皮帶斷裂;

　　1. Timing belt is broken due to impeller slipping or clamping;2. 葉輪變形。

　　2. The impeller is deformed.

　　四、汽缸侵蝕

　　4、 Cylinder erosion

　　1. 當燃燒室和水渠沖洗時，水會從排水管排出或排出白煙，導致水箱經常缺水。

　　1. When the combustion chamber and water channel are flushed, the water will be discharged from the drain pipe or white smoke will be discharged, resulting in frequent water shortage of the water tank.

　　2. 水渠、油溝沖洗(油與水呈白色)。

　　2. Flushing of water channel and oil groove (oil and water are white).

　　3.水渠與水渠的沖擊，導致缸體散熱不良，尤其是在高速時的沖擊更大。

　　3. The impact of water channel and water channel leads to poor heat dissipation of cylinder block, especially at high speed.

　　介紹了攪拌車水溫過高的處理方法。一旦水溫過高，需要及時解決。否則，很容易造成車輛損壞。

　　The treatment method of high water temperature in zhongkejufeng mixer was introduced. Once the water temperature is too high, it needs to be solved in time. Otherwise, it is easy to damage the vehicle.