攪拌車常用于建筑項目，雖然開起來有點難，但需求量大，利潤還是可觀的。當然如果您要選購到合適的攪拌車，就要提前去充分了解攪拌車的結構等方面的內容。

Mixer trucks are often used in construction projects. Although it is a little difficult to drive, there is a large demand and a considerable profit. Of course, if you want to buy a suitable mixer, you should fully understand the structure of the mixer in advance.

要了解攪拌車的工作原理。攪拌車主要由底盤和上車體兩部分組成。它的工作原理是利用攪拌槽內的葉片不斷攪拌槽內的混凝土，使其在一定時間內凝固，使攪拌車到達施工現場后仍能滿足使用條件。

Understand the working principle of mixer truck. The mixer truck is mainly composed of chassis and upper body. Its working principle is to use the blades in the mixing tank to continuously mix the concrete in the tank to make it solidify within a certain time, so that the mixer can still meet the service conditions after arriving at the construction site.

自動攪拌車的結構也應該清楚。攪拌罐是整個攪拌車的主要部分。作為儲存混凝土的容器，它對防止其凝固和離析起著決定性的作用。攪拌罐由前錐段、后錐段、圓柱段、葉片、滾道組成。前端與減速機連接。

The structure of the automatic mixer truck should also be clear. The mixing tank is the main part of the whole mixer truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. The mixing tank is composed of front cone section, rear cone section, cylinder section, blade and raceway. The front end is connected with the reducer.

后端通過托輪支撐在副車架上，罐體采用高強度鋼板，葉片采用高強度細晶合金鋼，具有更高的耐磨性，整個機頭一次性旋壓成型，與加強板焊接后更耐用。進料口采用漏斗形設計，進料速度更快。整個罐體焊接后，外圈加工，保證同軸度要求。

The rear end is supported on the subframe through the supporting wheel. The tank body is made of high-strength steel plate, and the blade is made of high-strength fine-grained alloy steel, which has higher wear resistance. The whole machine head is formed by one-time spinning, which is more durable after welding with the reinforcing plate. The feed inlet adopts funnel-shaped design, and the feeding speed is faster. After the whole tank is welded, the outer ring is processed to ensure the coaxiality requirements.

副車架是攪拌車的主要承重部件。運行期間的負載幾乎由它支撐。此外，行駛過程中路面的顛簸和減速造成的沖擊對副車架也有影響。副車架由主梁和后臺支撐架組成。主梁采用整體箱式結構梁，從根本上增強了其抗扭能力，保證了剛度要求。

The subframe is the main load-bearing component of the mixer. The load during operation is almost supported by it. In addition, the impact caused by road bumps and deceleration during driving also has an impact on the subframe. The subframe is composed of main beam and backstage support frame. The main beam is an integral box structure beam, which fundamentally enhances its torsional capacity and ensures the stiffness requirements.

使用攪拌車運輸混凝土有很多優點：

There are many advantages to transporting concrete with mixer truck:

1、攪拌車和泵車合二為一，降低了采購成本。

1. The mixer truck and pump truck are combined into one, which reduces the procurement cost.

2、攪拌車的使用大大提高了工作效率，加快了施工進程。

2. The use of mixer greatly improves the work efficiency and speeds up the construction process.

3、攪拌車的使用減少了勞動力的使用。

3. The use of mixer reduces the use of labor.

4、攪拌車使用方便快捷。

4. The mixer truck is easy to use.

5、自動攪拌車也可用于租賃，投資成本不高，快。

5. Automatic mixer can also be used for leasing, with low investment cost and fast return on investment.

以上就是今天為大家分享的關于問題的相關內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站http://www.sansungmobile.cn。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.sansungmobile.cn 。